Lbs per hour by gauge and pressure class, yield that counts the drop, coil-line and table work routed by part mix, and every duct run shipped with its fittings, liner and dampers. In a system your shop owns.
MONDAY MORNING
The schedule saw tonnage, not what kind of work. The plasma table got reprogrammed, the crew re-sequenced the day, and the AHU room ship date held because people stayed late.
The nest was clean. The remnants went to the bin instead of back to inventory, and nobody tracked the difference.
Complete in the system, missing on the truck. The field found out at the hanger.
WHAT IT TRACKS
By gauge, pressure class and work type, so the coil line and the fab table each get a real number.
Nesting yield and manufacturing yield tracked separately, so the drop either gets used or gets counted.
Straight run goes to the coil line. Fitting-heavy work goes to the table. The routing follows the parts, not the tonnage.
SMACNA pressure class and seal class travel with the part, so the fitter knows which joints need sealant before it ships.
Liner, dampers, flex connections and hangers tracked on their own, so a run is not complete until they are.
Staged by which piece goes up first, built from what is genuinely complete.
Your logo and your colors on every screen, your statuses and your package names. See the screens your shop runs on →
HOW IT RUNS
01
Plasma, laser or coil line, with the nest and the drop recorded.
02
Beading, seaming, lockforming and liner tracked as the piece moves.
03
Dampers, flex and hangers attached to the run before it can stage.
04
Loaded in the order the field installs, received and marked installed on site.
YOUR OWN SYSTEM
We walk your floor, set the system up around how you deliver, and put your name on it. One invoice for the build, then a low yearly rate for hosting and maintenance that does not climb. No per-seat charge, and after five years the system and its history still belong to the shop.
Why own your fab shop software90
days to delivery
2
visits to your shop
0
per-seat charges
1
database, yours alone
QUESTIONS SHOPS ASK
Through PypeServer, yes. Cut programs go out to the machine and what the machine actually ran comes back on the piece, so programmed cycle time and real machine time stop being the same number.
Pressure class and seal class ride on the traveler from the cut sheet to the install, so the shop and the field both see which joints need sealing and which gauge the piece was made from.
Yes. Pipe tracks on spools, heat numbers and hold points. Duct tracks on lbs per hour, yield and pressure class. Both run under one login, on their own logic, with the field module for the install crews.
Ninety days, in three 30-day steps, with two visits to your shop. The next 21 months go into perfecting it for your operation.
NEXT STEP
Bring a real nest, a duct run or the way you measure lbs per hour today. We will show you what the system looks like set up around it.
Book a live demo